The Use and Management of Plasson Water Dispenser

The Plasson water dispenser is composed of a drinking bowl, a movable bracket, a spring, a water sealing pad, the main water pipe installed on the movable bracket, a water inlet pipe, etc. The movable bracket is provided with a splash guard around the water inlet pipe. Next, let's talk about the use of the Plasson water dispenser.

Clean

After feeding chicken

Tools: a sewage bucket, a disinfectant bucket, and a rag

Method

1. Pour the remaining water in Plassoninto the sewage bucket
2. Wipe the surface of Plasson and the sink with a cloth dipped in disinfectant
3. Pour the residual water in the Plassontank into the sewage bucket again
4. The sewage shall be poured into the drainage ditch outside the shed and shall not be spilled on the ground inside the shed
5. The disinfectant shall be replaced timely according to the specific situation
6. Clean with water before and after immunization and on the same day
7. Selection of disinfectants requires low toxicity, high efficiency, no corrosion, and no irritation

Before entering chicken

Tools: bucket, rag, shoe brush, cleaning ball, disinfectant

1. Clean the water dispenser with clean water, especially the surface of the bucket wall
2. Water dispenser counterweight and connecting pipe should be cleaned as well
3. If the connecting pipe is not connected, it shall be dredged with a vent pipe
4. After cleaning, put it into the disinfectant solution for dipping and disinfection
5. Then hang it in the chicken house

Height and water level of the Plasson drinking water dispenser

1. Put it on the grid for 0-7 days, and increase with the growth of chickens after 8 days
2. The upper edge of the sink is horizontal or slightly higher than the back of the chicken
3. The water level in the tank accounts for about 1/3-1/2 of the tank depth
4. The counterweight of the water dispenser can only be half filled with water in the counterweight gourd